UP 562S32 KNX Switch/solar protection actuator 2 x AC 230 V, ∑ 16 A
In Stock
Description
- One relay contact per output
- Rated contact operating voltage: AC 230 V
- Rated contact frequency: 50/60 Hz
- Rated contact current: ∑ 16 A
- Screw terminals for connection of untreated single-core conductors, stranded without conductor sleeve 0.5 to 4 mm², stranded with conductor sleeve 0.5 to 2.5 mm²
- 3 binary inputs for potential-free contacts, determination of switching status via voltage generated in the device
- Poll voltage of the inputs: approx. 5 V
- Max. 10 m length of connecting cables, preferably J-Y(St)Y, pre-assembled YY6x0.6
- Bus-powered electronics
- Integrated bus coupling unit
- Mounting in appliance boxes according to DIN 49073 or in mounting case M 592/01 (accessories)
Additional functionalities GAMMA
- KNX Data Secure compatible
- Updateable with Siemens Firmware Download Tool
- Adjustable functions per switching output: status feedback, adjustable as NO or NC contact, cyclical monitoring, adjustable switch-on and switch-off delay, staircase function, scene control, logic operations, operating hours counting, disabling function or forced control, central switching function
- Adjustable functions of solar protection channel: adjustable operating modes: venetian blind with slats, shutter/awning, venting louver/roof window, direct movement to a position of the sunblind and the slats, status feedback, adjustable behaviour in case of alarm (wind, rain, frost), adjustable solar protection or heating/cooling automatic, scene control, disabling function, forced control
- Adjustable preferred position after download, in case of bus voltage failure and recovery
- Adjustable functions of each input: switching, dimming, colour temperature control, solar protection control, sending values, scene control, pair of inputs operation, controller extension (operating mode switchover, presence function, setpoint shift), adjustable debounce time, locking of each input
- 8 logic functions
Reviews
There are no reviews yet.